Design of Trehalose-Based Amide/Sulfonamide C-type Lectin Receptor Signaling Compounds

Mincle agonists have been shown to induce inflammatory cytokine production, such as tumor necrosis factor-alpha (TNF) and promote the development of a Th1/Th17 immune response that might be crucial to development of effective vaccination against pathogens such as Mycobacterium tuberculosis. As an expansion of our previous work, a library of 6,6′-amide and sulfonamide α,α-d -trehalose compounds with various substituents on the aromatic ring was synthesized efficiently in good to excellent yields. These compounds were evaluated for their ability to activate the human C-type lectin receptor Mincle by the induction of cytokines from human peripheral blood mononuclear cells. A preliminary structure–activity relationship (SAR) of these novel trehalose diamides and sulfonamides revealed that aryl amide-linked trehalose compounds demonstrated improved activity and relatively high potency cytokine production compared to the Mincle ligand trehalose dibehenate adjuvant (TDB) and the natural ligand trehalose dimycolate (TDM) inducing dose-dependent and human-Mincle-specific stimulation in a HEK reporter cell line.     

New insights into microstructural changes during transient liquid phase bonding of GTD-111 superalloy

The effects of joining temperature (T_J) and time (t_J) on microstructure of the transient liquid phase (TLP) bonding of GTD-111 superalloy were investigated. The bonding process was applied using BNi-3 filler at temperatures of 1080, 1120, and 1160 °C for isothermal solidification time of 195, 135, and 90 min, respectively. Homogenization heat treatment was also applied to all of the joints. The results show that intermetallic and eutectic compounds such as Ni-rich borides, Ni−B−Si ternary compound and eutectic-γ continuously are formed in the joint region during cooling. By increasing t_J, intermetallic phases are firstly reduced and eventually eliminated and isothermal solidification is completed as well. With the increase of the holding time at all of the three bonding temperatures, the thickness of the athermally solidified zone (ASZ) and the volume fraction of precipitates in the bonding area decrease and the width of the diffusion affected zone (DAZ) increases. Similar results are also obtained by increasing T_J from 1080 to 1160 °C at t_J=90 min. Furthermore, increasing the T_J from 1080 to 1160 °C leads to the faster elimination of intermetallic phases from the ASZ. However, these phases are again observed in the joint region at 1180 °C. It is observed that by increasing the bonding temperature, the bonding width and the rate of dissolution of the base metal increase. Based on these results, increasing the homogenization time from 180 to 300 min leads to the elimination of boride precipitates in the DAZ and a high uniformity of the concentration of alloying elements in the joint region and the base metal.     

Broadband MIMO Antenna System for 5G Operations in Mobile Phones

A broadband 8‐antenna multiple‐input and multiple‐output (MIMO) system working for 5G new radio N77 (3.3‐4.2 GHz) in mobile terminals is proposed. In particular, each antenna element/unit consists of a monopole‐type meandered branch and an inverted U‐shaped self‐isolated antenna branch; and the antenna unit is fed by the meandered branch. The antenna unit has two resonances generated separately by each branch of the antenna unit. Since the monopole couples strongly with the self‐isolated antenna element that has the inherent self‐isolation characteristics, quite good isolation for the broadband 8‐antenna MIMO system can be obtained. The results such as antenna efficiency, radiation patterns, envelope correlation coefficient, and channel capacity are also presented.     

0Cr17Ni4Cu4Nb传感器断裂原因分析

某力学传感器在出厂检验流程中发生断裂失效,为了确定失效原因,防止此类失效事件再次发生,实验对该传感器的力学性能、金相组织和断口形貌进行了分析,确定了断裂原因。结果表明,传感器的失效模式为氢致延迟开裂,材料中氢含量偏高和开裂位置机加工质量较差是导致传感器发生氢致开裂的主要原因。结合失效原因,提出了改进措施。     

基于紧耦合结构的宽带基站天线设计

随着5G移动通信频段的公布,传统基站天线已不足以覆盖其工作频段。文章以紧耦合阵列天线理论为基础,提出了一种基于紧耦合结构的交叉偶极子宽带基站天线。该天线由两对正交的领结状偶极子天线构成,通过两对交叉偶极子之间的耦合效应,有效地展宽了天线的阻抗带宽。同时,通过在天线和金属反射板之间加载电阻型频率选择表面,吸收由反射板引入的谐振反射波,改善天线高频端辐射性能。仿真及测试结果表明:该天线在1.7-3.6 GHz 频率范围内,可以满足基站天线的设计指标,两端口驻波比均小于1.5,两端口之间隔离度大于55 dB,半功率波束宽度满足65°±5°范围,且整个频段内增益均大于8.5 dBi。     

镍基高温合金锥筒形件拉深旋压成形机理研究

针对镍基高温合金因加工硬化严重成形时极易产生破裂和起皱等典型缺陷的问题,以锥筒形壳体类零件为对象,提出了一种由锥形预制坯经过真空固溶处理后拉深旋压成形锥筒形件的方法,并对其成形机理进行了研究。基于Abaqus/Explicit平台,建立了锥筒形件拉深旋压有限元模型,分析了成形过程中的瞬态等效应力、等效塑性应变、切向应力、壁厚及三向应变分布规律。结果表明:在旋压成形过程中,最大瞬态等效应力位于旋轮接触区及附近区域、最大瞬态等效塑性应变位于坯料口部;瞬态切向压应力最大值位于旋轮接触区,而瞬态切向拉应力最大值位于旋轮接触区附近的两侧区域。筒形段中部壁厚减薄,而坯料口部壁厚增厚。旋压成形试验表明,锥形预制坯经拉深旋压后可获得壁厚均匀的锥筒形件。     

Two‐sided matching framework for optimal user association in 5G multi‐RAT UDNs

Recently, academic and industrial research communities are paying more explicit attention to the 5G multiple radio access technology ultra‐dense networks (5G multi‐RAT UDNs) for boosting network capacity, especially in UD urban zones. To this aim, in this paper, we intend to tackle the user association problem in 5G multi‐RAT UDNs. By considering the decoupled uplink/downlink access (DUDA), we divide our user association problem into two distinct subproblems representing, respectively, the uplink and the downlink channels. Next, we formulated each one as a nonlinear optimization problem with binary variables. Then, to solve them, we were restricted by the hard complexity, as well as the hard feasibility of centralized user association schemes. Thus, to resolve our user association problem in a reasonable time and distributed manner, we formulated each subproblem as a many‐to‐one matching game based on matching theory. Next, we provide two fully distributed association algorithms to compute the uplink and downlink stable matching among user equipments (UEs) and base stations (BSs). Simulation results corroborate our theoretical model and show the effectiveness and improvement of our achieved results in terms of the overall network performance, quality of service (QoS), and energy efficiency (EE) of UEs.     

BHA轴向磁干扰对方位测量误差的影响——基于人工磁场模拟方法

井下钻具组合（BHA）磁化形成的轴向磁场干扰是定向组件磁方位测量的一个重要的误差因素。为了对该误差因素进行独立分析，建立了大型三轴亥姆霍兹线圈人工磁场系统作为研究环境，使用不同磁通量的多个磁化组件作为干扰源研究在理想环境中轴向干扰磁场对定向组件的影响，并在此基础上提出了一种估算磁化组件磁极强度和校正轴向干扰的方法，通过改变空间姿态和三轴亥姆霍兹线圈磁场强度，分析了在不同井斜角、方位角和磁倾角的井眼轨迹中，轴向磁干扰对定向组件方位测量误差的影响，最后证明了校正磁性组件的轴向干扰方法，可以有效地提升BHA定向组件的方位测量精度。